Your water heater can be this unassuming home’s biggest energy user, and it’s not unusual for them to break down at the most inopportune times. If you find yourself in this situation, there are a few things you can try before calling a pro.
The first step is to wait until the pilot light goes out on its own, or turn it off at the gas valve or electrical panel if possible. This may seem counterintuitive but letting the water run for a while might get rid of excess debris that could clog up your unit once you turn it back on- plus water that sits in the bottom of an unused tank will start to smell funky pretty quickly anyway. You should also open the door on your hot water tank and see if it’s full of sediment. If so, you may want to consider having your heater flushed professionally before trying to use it again.
Once you’ve got all that handled, turn on a faucet and let the water run until it gets as hot as possible- this will prime the heater with warm water and make sure there are no air pockets between layers of cold water that could give you some less than ideal showers once things get going again. Also, check all your valves along the way (there should be one at each fixture) to make sure they’re turned off before you head back to your unit…if not, more than just your shower might be cold!
If everything goes well, you should have hot water in no time- just remember that if your tank was full of sediment, it may take a few uses to get rid of the excess junk from your pipes. Putting a little chlorine bleach in with your laundry can help keep clothes smelling fresh and clean while you work out any kinks.
If the pilot light keeps going out or if it never comes on at all, don’t risk getting scalded: call a pro! The problem could be as simple as relighting the pilot (which is what we’ll do) or something more serious like gas leaks, which you won’t want to deal with yourself.
If you’re looking for an honest plumber who has been serving this area for almost 20 years, call us. We’re here 24/7 to take your calls and are happy to send helpful reminders to our email list.
Why you need an experienced plumber for your water heater emergency
If you’re reading this, then you’ve probably already experienced a water heater emergency. If it’s leaking all over your garage or basement and you don’t know what to do about it, then it might be time for you to call an expert plumber for help.
Of course, the first thing that comes to mind when your water heater is dripping is to turn off the electricity supply so as not to electrocute yourself – but wait! This isn’t something you should try at home. Your household circuit breaker box will not protect you from electric shock and hence turning off the power supply is just not worth risking.
With that in mind, here are some tips on how best to handle an emergency of sort:
· First and foremost, do not turn off the gas supply or electricity
· Call your plumber as soon as possible to prevent any further damage
· If you’ve got a gas water heater, then shut off the gas supply at your external meter (usually located on the side of your house) and call for help. Your plumber will be more than capable of resetting it after fixing the leak. It’s risky to attempt doing this on your own due to potentially fatal consequences.
· With an electric one, just lookout for a tripped breaker in your home – if there is one, then switch it back on before calling a plumber. For future reference, don’t forget to turn off the power supply before performing any work on your water heater.
· Always remember that it’s way safer and easier to call an experienced plumber for help than trying to fix it yourself. Much as you might want to save money, this isn’t a job you should trust in someone who doesn’t know what he’s doing.
For more details and information about our services, please visit us. You can also follow us on Facebook for all the latest news and updates.
Understanding the Benefits of Central Heat Pump Systems
Heating a home is a costly affair and it contributes the most to your monthly energy bills. If you’re looking for ways to reduce your expenditure on heating while still ensuring that your house is warm all throughout the winter months, then investing in a heat pump system makes sense. A heat pump helps you save up on energy costs while also making sure that your place stays comfortable all day long. You can be on our team of technicians for heat pump installation in Leander, TX.
Heat pumps are capable of providing both heat and cooling to your home. It works in the same way as any other ventilation system but in this case, they rely on electricity to function. They’re composed of different components that work together in order to supply both heating and cooling services – which is also one reason why they contribute significantly to higher energy bills. There are two types of heat pumps depending on the type of heating service you need:
· Gas furnaces with electric backup – if your gas furnace is fitted with an additional electrical component, then it’s known as a combination gas/electric furnace or simply ‘combination unit’. Combination units feature equipment for both heating and cooling and they rely on both gas and electric power in order to function.
· Geothermal heat pumps – these systems are basically split into two types: air-source heat pumps and ground-source heat pumps. Air source ones use outside air to distribute cooling whereas the latter draw their energy from underground water sources instead.
As for installation, a geothermal heat pump is installed vertically in a pit that’s dug next to a building. This system is equipped with an indoor unit that houses a compressor, fan, reversing valve, and expansion valve. The outdoor unit consists of a heat exchanger, compressor, fans, and an optional backup heater. Depending on your preferences and budget, you can opt for either one – or even get them installed in both your home and office.
Geothermal heat pumps are definitely the most energy-efficient, but they’re also quite expensive to install. If you find yourself in need of immediate assistance for heat pump repair, then call us at ASAP Plumbing & Heating. We have over forty years of experience in this field, so rest assured that we can handle any problem for you. Call now!
Key Benefits Of Using A Water Conditioner
Water conditioning is a process where water is purified before it gets delivered into homes. It’s just like when you drink bottled water – only that the city or municipality does not purify it as much as commercial companies do. Basically, tap water contains certain dissolved elements which make it unfit for drinking. Higher-than-acceptable levels of minerals and metals such as magnesium, manganese, iron, copper, and lead can also be found in tap water.
One way to address the problem is through a water filter, but it doesn’t purify the water completely. If you’re looking for a more effective solution, then investing in a water conditioner might be your answer.
One example of a type of system used for purifying water is reverse osmosis (RO). It’s capable of removing ninety percent or more contaminants from tap water such as pharmaceuticals and other chemicals – even arsenic and fluoride which are considered safe by government standards may not be healthy after all. This technology forces high-pressure tap water through semi-permeable membranes to filter out unwanted elements. The downside is that RO wastes four gallons of tap water for every one gallon it produces as clean drinking water.
A much more efficient solution uses a slightly different technology called electrodialysis reversal (EDR). Like reverse osmosis, it also forces tap water through a membrane but instead of pushing it with high pressure, electric charges are used. EDR doesn’t require much energy and it can remove up to 90 percent of contaminants from tap water using only nine gallons per one purified gallon. It does not waste any clean drinking water too – making it an ideal option for homes with small gardens where gardeners will be able to use recycled water.
Important places in the city of Leander, TX
One of the most important places to know in this city is the post office. This one is located at 801 S Highway 183, Leander, TX 78641. You can check their website to check hours and locations here: https://tools.usps.com/find-location.htm?location=1370043
Another important place to know and have their phone number handy is the police department. This one is located at 705 Leander Dr, Leander, TX 78641. If you want to have more information about their offices and hours of operation you can go to their website and also you could make an appointment to talk to any supervisor about the new regulations in the city. Visit this page here https://www.leandertx.gov/police
